Deutz — Checking the compression pressure

D 2011 w General TD 2011 w, TCD 2011 w W 00-02-06 Checking the compression pressure Commercial available tools: – Compression pressure tester. . . . . . . . . . . . . . . . . . . . . . . . 8005 W 01-01-01 W 07-07-01 Special tools: – Connector . . . . . . . . . . . . . . . . . . 100120 Attention! Pay attention to utmost cleanliness when working on the fuel system. Remove residue paint and particles of dirt before removing. Clean the respective affected parts care- fully. Blow damp areas dry with compres- sed air. Observe the safety regulations and natio- nal specifications for handling fuels. Close all connections immediately after opening with new, clean plugs/caps.

Do not remove plugs/caps until immedia- tely before assembling. Collect leaking operating substances in suitable vessels and dispose of according to regulations. After all work on the fuel system, it must be bleeded - see the operation manual, chap- ter "6 Fuel system“. 6 Checking the compression pressure z Set valve clearance. W 01-01-01 z Removing fuel injectors. W 07-07-01 z Mount sealing ring (1). Use sealing ring (1) for fuel injector. 2 z Insert connector (2). 1 © 47534-0 © 12/2008 17768-001 1/6