D 2011 w Cylinder head TD 2011 w, TCD 2011 w W 01-01-01 Valve clearance setting schematic According to the order given below, the setting of the valve clearance is possible in two turns of the crankshaft (each 360°). Crankshaft position 1 z Turn over crankshaft until the valve overlap is achieved on cylinder 1. z Set black marked valves. 6 Crankshaft position 2 © 25894-5 z Turn the crankshaft one turn (360°). z Set black marked valves. z Clean sealing surfaces. z Mount new gasket. Note installation position: The bar (1) must face the front cover. 1 © 47567-0 © 12/2008 17770-001 4/6