D 2011 w Cylinder head TD 2011w, TCD 2011 w W 01-02-02 z Remove push rods (1). Lay out components in the order in which they should be installed. z Visually inspect the components. 6 1 1 © 47565-0 Installing the rocker arm and rocker arm bracket z Insert stop rods (1). Note the assignment of the stop rods. The stop rod must be seated with the ball head in the ladle of the tappet. 1 1 © 47565-0 z Loosen lock nut (1). z Unscrew setting screws (2). z Mount rocker arm bracket (3). z Position rocker arm. 3 The ball heads (4) must be seated in the ladles of the stop rods. The rocker arm (arrow) must sit on the valve stem. 1 2 4 © 47591-0 © 12/2008 17771-001 2/4