D 2011 w Cylinder head TD 2011 w, TCD 2011 w W 01-04-04 Removing and installing cylinder head Commercial available tools: – Socket wrench insert Torx E18 . . . . . . . . . . . . . . . . . . . . . . . . . 8116 – Dog wrench. . . . . . . . . . . . . . . . . . . 8018 – Rotation angle disc . . . . . . . . . . . . . 8190 W 01-02-02 W 01-04-09 W 06-02-03 . . . . . . . . . . . .TD 2011 w, TCD 2011 w W 06-07-03 . . . . . . . . . . . .D 2011 w W 06-09-08 . . . . . . . . . . . .TD 2011 w, TCD 2011 w W 09-08-04 Special tools: – Plugs/caps . . . . . . . . . . . . . . . . . 170160 Attention! Pay attention to utmost cleanliness when working on the fuel system.
Remove residue paint and particles of dirt before removing. Clean the respective affected parts care- fully. Blow damp areas dry with compres- sed air. Observe the safety regulations and natio- nal specifications for handling fuels. Close all connections immediately after opening with new, clean plugs/caps. Do not remove plugs/caps until immedia- tely before assembling. Collect leaking operating substances in suitable vessels and dispose of according to regulations. After all work on the fuel system, it must be bleeded - see the operation manual, chap- ter "6 Fuel system“. 6 Removing the cylinder head z Unscrew screws (1). 1 © 47551-1 © 12/2008 17773-001 1/8