Deutz — Removing and installing cylinder head

D 2011 w Cylinder head TD 2011 w, TCD 2011 w W 01-04-04 Installing the cylinder head Measure the piston overhang on all pistons. Select cylinder head gasket according to the largest piston projection measured. z Check piston overhang. W 01-04-09 6 © 47552-0 z Select cylinder head gasket according to the largest piston projection measured. 1 recess 0.325 - 0.604 mm 2 recesses 0.605 - 0.704 mm 3 recesses 0.705 - 0.804 mm Example:Piston overhang = 0.7 mm, corre- sponds to cylinder head gasket with 2 recesses (arrow). © 47552-1 Recess cylinder head z Select cylinder head gasket according to the largest piston projection measured.

1 recess 9.820 - 10.140 mm 2 recesses 10.141 - 10.239 mm 3 recesses 10.240 - 10.310 mm Example:Piston overhang = 10.150 mm, corresponds to cylinder head gasket with 2 recesses (arrow). z Remove the measuring device and holders. © 47552-1 © 12/2008 17773-001 3/8