D 2011 w Cylinder head TD 2011 w, TCD 2011 w W 01-04-04 Technical Data Testing and setting data 6 Tightening specifications For the tightening procedure according to torque using a torque wrench, a maximum variation of the tightening torque of +/- 10% is permissible. © 12/2008 17773-001 7/8 D no.
Name Additional information Value P02 75 Piston overhang Identification, cylinder head gasket = 1 recess 0.325 - 0.604 mm P02 76 Piston overhang Identification, cylinder head gasket = 2 recesses 0.605 - 0.704 mm P02 77 Piston overhang Identification, cylinder head gasket = 3 recesses 0.705 - 0.804 mm Recess cylinder head P02 75 Piston overhang Identification, cylinder head gasket = 1 recess 9.820 - 10.140 mm P02 76 Piston overhang Identification, cylinder head gasket = 2 recesses 10.141 - 10.239 mm P02 77 Piston overhang Identification, cylinder head gasket = 3 recesses 10.240 - 10.310 mm D no. Name Screw type Notes / Remark Value A01 001 Cylinder head on crankcase Stage 1:
Cylinder head screws can be used a maximum of 3x with written docu- mentation. Otherwise use new cylinder head screws. Observe tightening sequence. 30 Nm A01 001 Cylinder head on crankcase Stage 2 80 Nm A01 001 Cylinder head on crankcase Stage 3 160 Nm A01 001 Cylinder head on crankcase Stage 4 90° A07 003 Injection line on fuel injector / injection pump M12x1.5 25 Nm A09 020 Pipe clip on holder M6x16 21 Nm