Deutz — Removing and installing the turbocharger

Exhaust system/Charging TD 2011 w, TCD 2011 w W 06-06-04 Technical Data Tightening specifications 6 For the tightening procedure according to torque using a torque wrench, a maximum variation of the tightening torque of +/- 10% is permissible. © 12/2008 17807-001 8/8 ID no. Name Screw type Notes / Remark Value A06 004 Pin bolts on exhaust pipe coated Use new pin bolts 12 Nm A06 020 Turbocharger on exhaust pipe M8 21 Nm A08 042 Lubricating oil pipe on turbocharger / crankcase Hollow screw Replace sealing rings 29 Nm A08 044 Oil return line, hex spuds to turboch- arger M16x1.5 Use new sealing ring 40 Nm A08 049 Holder oil return line on crankcase Torx, M6x14-8.8 8.5 Nm