Komatsu — SWINGING

MACHINE OPERATIONS AND CONTROLS OPERATION SWINGING WARNING Check that swing lock monitor (2) is not lighted up. If the swing control lever is operated quickly, the upper structure will move quickly; if it is operated slowly, the upper structure will move slowly. 1. Before operating the swing, turn swing lock switch (1) OFF. 2. Operate left work equipment control lever (3) to operate the swing. At the N position, the spring brake is applied. 3. When not carrying out swing operations, set swing lock switch (1) to the ON (SWING LOCK) position. This will prevent the upper structure from swinging even if the left work equipment control lever is operated by mistake to the swing position. 3-64