Komatsu — LOADING AND UNLOADING WITH TRAILER

TRANSPORTATION OPERATION 6. Turn the swing lock switch ON to apply the swing lock. 7. Align the direction of travel with the ramps and travel slowly. Lower the work equipment as far as possible without causing interference. When on the ramps, operate only the travel lever. Do not operate any other lever or pedal. 8. Do not operate the travel boost pedal. (Only machines with blade specification) 9. Stop the machine at the specified place, turn the swing lock switch OFF to release the swing lock, then swing the upper structure slowly 180°. 10. Stop the machine at the specified position on the trailer. 11. Turn the swing lock switch ON to apply the swing lock. 3-92