Komatsu — WEAR PARTS LIST

MAINTENANCE WEAR PARTS LIST WEAR PARTS LIST Wear parts such as the filter element, bucket tooth, etc. are to be replaced at the time of periodic maintenance or before their abrasion limits. The wear parts should be changed correctly in order to use the machine economically. For part change, Komatsu genuine parts of excellent quality should be used. When ordering parts, please check the part number in the parts book. The parts in parentheses are to be replaced at the same time. 4-9 Item Part No.

Part Name Q’ty Replacement frequency Engine oil filter 600-211-2110 Cartridge 1 Every 500 hours service Fuel filter 600-311-7441 Cartridge 1 Every 500 hours service Hydraulic oil filter 201-60-71180 (07000-02135) Element (O-ring) 1 (1) Every 500 hours service Fuel feed pump pre-filter 600-311-7410 Cartridge 1 — Air cleaner 600-181-6340 Element assembly 1 — Additional filter for breaker (if equipped) 201-973-7480 Element (O-ring) 1 — Electric heater 6732-11-4811 Gasket 2 — Bucket 20X-70-23160 (203-70-43212) (203-70-43220) Vertical pin type Tooth (Pin) (Pin) 4 (4) (4) — 20X-70-14160 (20X-70-00100) Horizontal pin type Tooth (Pin) 4 (4) 20X-933-1110 20X-933-1120 (21W-70-21810) (01803-02228) Cutter (left) Cutter (right) (Bolt) (Nut) 1 1 (6) (6)