MAINTENANCE PROCEDURE MAINTENANCE REPLACE ADDITIONAL BREAKER FILTER ELEMENT (If equipped) WARNING Immediately after operating the engine, all parts still retain high temperature. Never replace the filter in such condi- tion. Replace it only after each part has sufficiently cooled. NOTICE For details of the replacement interval for the element, see "MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER (PAGE 4-18)". Prepare a container for draining off oil. 1. Place the container under the filter element. 2. Turn filter case (1) counterclockwise to remove it. Remove element (2) from the case. 3. Unscrew plug (3) from filter case (1). 4. Clean the removed parts. Mount a new element (2) and O-ring (4). 5.
After the case reaches the filter holder, additionally tighten the case by more than a 1/2 turn. 4-46