EXPLANATION OF COMPONENTS OPERATION FUSE NOTICE Before replacing a fuse, be sure to turn off the starting switch. The fuses protect the electrical equipment and wiring from burning out. If the fuse becomes corroded, or white powder can be seen, or the fuse is loose in the fuse holder, replace the fuse. Replace the fuse with another of the same capacity. FUSE CAPACITIES AND CIRCUIT NAMES FUSIBLELINK If the starting motor does not move even when the starting switch is turned to the ON position, there is probably a break in fusible link (2), so open right side inspection cover (1) and check or replace.
REMARK A fusible link refers to the large-sized fuse wiring installed in the high current flow portion of the circuit to protect electrical components and wiring from burning, in the same way as an ordinary fuse. 3-28 Fuse capacity Name of circuit (1) 5 A Engine control (2) 15 A Monitor panel (3) 10 A Spare fuse (4) 20 A Heater, horn, wiper, room lamp, radio (5) 30 A Working lamp, reset power source, swing brake buzzer, option power source