Komatsu — CAR RADIO

OPERATION EXPLANATION OF COMPONENTS METHOD FOR MANUAL TUNING Press the tuning button lightly to adjust to the desired fre- quency. Each time the button is pressed, the frequency will change by 9 kHz. button: Select station at higher frequency button: Select station at lower frequency METHOD FOR AUTOMATIC TUNING Keep the tuning button pressed for at least 2 seconds and then release it. When reception from a broadcasting station is picked up, the selector will automatically stop at that position. When searching for the next station, keep the selector button pressed again for at least 2 seconds. button: Select station at higher frequency button:

Select station at lower frequency If the reception is weak, and stations are not found, adjust the frequency manually to select the desired station. ADJUSTING TIME 1. Keep T.ADJ button (1) pressed, and press hour adjust- ment button (2). The hour display will change, so when it reaches the cor- rect hour, release the button. 2. Keep T.ADJ button (1) pressed and press minute adjust- ment button (3). The minute display will change, so when it reaches the correct time, release the button. METHOD OF USING RESET BUTTON If RESET button (1) is pressed at the same time as the time signal or standard time, the display will return immediately to the exact hour ( hour 00 min.).

If the display is 01 – 29 min, the display will go back to 0 min. for the same hour. If the display is 30 – 59 min, the display will advance to 0 min. for the next hour. [Example] 10:29 10:00 (returns to exact hour) 10:30 11:00 (Advances to next exact hour) 3-35