Komatsu — BEFORE STARTING ENGINE

OPERATION MACHINE OPERATIONS AND CONTROLS 8. Check for damage or displaced window Check that there is no damage or displacement of the window. If any damage is found, replace with a new part. If the window comes out of position or breaks during operations, do not continue operations. Stop immediately and repair the window. 9. Clean rear view mirror, check for damage Check that there is no damage to the rear view mirror. If it is damaged, replace it with a new mirror. Clean the surface of the mirror and adjust the angle so that the view to the rear can be seen from the operator’s seat. 10.

Seat belt option and mounting clamps Check that there is no abnormality in the seat belt or mounting clamps. If there is any damage, replace with new parts. 11. Check bucket with hook for damage. Check the hook, catcher and hook foot for damage. If damage is found, contact your Komatsu distributor for repair. 3-39