Ditch Witch SK1050 — Attachment

SK1050 Operator’s Manual Prepare - 47 Connect Attachment Assemble Accessories Fire Extinguisher If required, mount a fire extinguisher near the power unit but away from possible points of ignition. The fire extinguisher should always be classified for both oil and electric fires. It should meet legal and regulatory requirements. Connect Attachment NOTICE: Use only Ditch Witch ® -approved attachments. Attachments can change the stability and operating characteristics of the unit. See attachment operation manual for instructions regarding proper operation of attachments. Attachment IMPORTANT:

Before connecting attachment to unit, ensure that mount and receiver plates are free of dirt and debris. 1. Position attachment on level surface with enough space behind it to accommodate unit. 2. Start engine. 3. Tilt mount plate (2) forward. t43om006w.eps 4. Position mount plate in the upper lip of the receiver plate (1) on attachment. 1 2 5. Raise lift arms while tilting back mount plate. IMPORTANT: Attachment should be raised enough to clear the ground. Mount plate should be tilted back fully. t05om026c.eps