Drive - 52 SK1050 Operator’s Manual Start Unit Start Unit Moving machine. Crushing can cause death or serious injury. To help avoid injury: Start and operate only from platform. 1. Ensure all controls are in neutral. 2. Set parking brake. 3. Turn ignition switch to start position and release when engine starts. NOTICE: Only operate in well ventilated areas. EMERGENCY SHUTDOWN: Turn ignition switch to STOP. 4. Move throttle to half open. Drive General Operation Tipover possible. Machine can tip over and crush you. To help avoid injury: Always operate with load end uphill. Always carry load low. High load can cause tipping, loss of load or loss of visibility.
Operate at slow speed when on rough terrain. Never drive across slopes. Never jerk control levers. Use a steady even motion. Do not park unit on slope without lowering attachment to the ground, returning all controls to neutral position, shutting down unit, and applying parking brake. See page 100 for operating capacity.