Drive - 54 SK1050 Operator’s Manual Drive Safe Slope Operation Tipover possible. Machine can tip over and crush you. To help avoid injury: See “General Operation” on page 52. Operating safely on a slope depends upon many factors including: Distribution of machine weight, including front loading and absence of load Height of load Even or rough ground conditions Potential for ground giving way causing unplanned tilt forward, reverse or sideways Nearness of ditches, ruts, stumps or other obstructions and sudden changes in slope Speed Turning Braking performance Operator skill EMERGENCY EXIT: Release controls and step off platform.
These varying factors make it impractical to specify a maximum safe operating angle in this manual. It is therefore important for the operator to be aware of these conditions and adjust operation accordingly. Maximum engine angle and braking performance are two absolute limits which must never be exceeded. These maximums are stated below since they are design limits. These design limits usually exceed the operating limits and must never be used alone to establish safe operating angle for variable conditions. Maximum engine lubrication angle – 20° Maximum park brake holding force – equal to traction of one track. Maximum service brake retarding force – equal to traction of both tracks.