Service - 68 SK1050 Operator’s Manual Precautions Precautions Read operator’s manual. Know how to use all controls. Your safety is at stake. 273-475 To help avoid injury: Unless otherwise instructed, all service should be performed with engine off. Before servicing equipment, lower unstowed attachments to ground. Wear personal protective equipment. Working under Raised Lift Arms Crushing can cause death or serious injury. Secure extended cylinder with locking device before servicing. 273-231 Pin safety supports as indicated when working under raised lift arms. Welding Precaution t35om037w.eps NOTICE: Welding can damage electronics. Disconnect battery to prevent damage to battery.
Do not turn off battery disconnect switch with engine running, or alternator and other electronic devices may be damaged. Connect welder ground clamp close to welding point and make sure no electronic components are in the ground path. Always disconnect the Engine Control Unit ground connection from the frame, harness connections to the ECU, and other electronic components prior to welding on machine or attachments.