Service - 74 SK1050 Operator’s Manual Startup/10 Hour Check Hydraulic Fluid Level Check hydraulic fluid level at startup and every 10 hours. Maintain fluid level at halfway point on sight glass (2), when engine is off, cylinders are fully retracted, and fluid is cool. If low, add THF at fill (1). Check Brake Operation Check brake operation at startup and every 10 hours or more often when conditions warrant.. IMPORTANT: Engine must be running to check brake operation. Ensure parking brake pin (shown) moves freely allowing brake to be engaged and disengaged. Clean mud and debris from area around pin.
Check Lug Nut Torque Check lug nut torque at 10 hours, 50 hours and every 200 hours thereafter. Tighten to 88-95 ft•lb (108-129 N•m), as needed. 1 2 t35om013w.eps t35om014w.eps t35om036w.eps