SK1050 Operator’s Manual Service - 81 250 Hour 250 Hour Change Engine Oil and Filter Change engine oil and filter every 250 hours. Raise lift arms and install safety supports. See “Working under Raised Lift Arms” on page 68. Drain oil (1), change filter (2) and add 5 qt (4.7 L) of DEO at fill (3). See page 78. IMPORTANT: Use oil specified in “Engine Oil Temperature Chart” on page 70. Check Intake Air Line Check the intake air line every 250 hours. NOTICE: Keep dust out of the intake air line to prevent damage to the engine. If the clamp is loose, apply oil to the threads and retighten it. If the hose appears cracked or worn, replace it.
Location Task Notes Change engine oil and filter DEO Check intake air line Check fan belt for tension and damage 1/4-1/3” (7 -9 mm) Change hydraulic filter Check lug nut torque 88-95 ft•lb (108-129 N•m) Check idler roller bearings 3 2 1 t53om010h.eps t43om019w.eps