John Deere 400 6076 — John Deere 400 6076 User Manual

Cylinder Block, Liners, Pistons and Rods/Check Engine Rotation for Excessive Tightness TORQUE-TURN CONNECTING ROD CAP SCREWS • Using engine axis method to TORQUE-TURN connecting rod cap screws: 1. After tightening cap screws to 75 N·m (55 lb-ft), mark connecting rod cap and socket. 2. Position handle of wrench parallel to centerline of engine crankshaft axis (A). 3. Tighten 1/4 turn (90—100˚) clockwise until handle of wrench is perpendicular to centerline of engine crankshaft axis (B) as shown. RG7047 -UN-28JUL94 10 43 RG,CTM86,G10,41-19-14FEB95 • Using JT05993 Torque Angle Gauge to TORQUE-TURN connecting rod cap screws: 1.

After tightening cap screws to 75 N·m (55 lb-ft), follow directions provided with gauge and TORQUE-TURN each cap screw 90˚—100˚. RG5698 -UN-27AUG90 JT05993 Torque Angle Gauge RG,CTM6,G10,4 -19-22AUG91 CHECK ENGINE ROTATION FOR EXCESSIVE TIGHTNESS 1. Rotate crankshaft several revolutions to be sure engine rotates without excessive tightness. 2. Check liners for deep scratches caused by an improperly installed or broken piston ring. 3. Check side clearance of rods. Must have slight side-to-side movement. CTM42 (24MAR95) 10-43 6076 Diesel Engines—S.N. (500000— ) S11,0402,BK -19-08MAR94 160101 PN=128