Crankshaft, Main Bearings and Flywheel/Service Equipment and Tools Rear Wear Sleeve Puller Kit . . . . . . . . . . . . . JDG790 Used to remove rear wear sleeve with oil seal housing installed on 400, 450, and 500 Series Engines. Set consists of: A—Hose Clamp (500 Series) . . . . . . . . . . . . . 219469 B—Collet Halves (400/450 Series) . . . . . . . . JDG790-1 C—Forcing Screw (400/450/500 Series) . . . . . . 35945 D—Pulling Plate (400/450/500 Series) . . . . . JDG790-2 E—Retainer Clip (400/450/500 Series) . . . . . . . 13876 F—Shaft Protector (400/450/500 Series) . . . . . . 215177 G—Collet Halves (500 Series) . . . . . . . . . . JDG790-3 H—Hose Clamp (400/450 Series) . . . . . . . . . .
19311 RG6457 -UN-22OCT92 RG,JDG790 -19-03OCT94 Oil Seal Housing Alignment Tool . . . . . . . . . . JDG796 RG6590 -UN-18FEB93 Use with oil seal housing casting numbers R115050 and R125027. RG,JDG796 -19-08AUG94 15 4 SERVICE EQUIPMENT AND TOOLS NOTE: Order tools from the U.S. SERVICEGARD™ Catalog or from the European Microfiche Tool Catalog (MTC). Some tools may be available from a local supplier. Name Use D01251AA Puller* Used to remove crankshaft gear. *Part of D01047AA 17-1/2 and 30-Ton Puller Set RG,CTM42,G15,32-19-11JUN93 CTM42 (24MAR95) 15-4 6076 Diesel Engines—S.N. (500000— ) 160101 PN=133