Camshaft and Timing Gear Train/Check Valve Lift CHECK VALVE LIFT NOTE: Measuring valve lift can give an indication of wear on camshaft lobes and cam followers or bent push rods. IMPORTANT: For a more accurate measurement, it is recommended that valve lift be measured at 0.00 mm (in.) valve clearance. 1. Remove turbocharger oil inlet line clamp and rocker arm cover. Loosen locknut on rocker arm. Set valve clearance at 0.00 mm (in.). Tighten locknut. 2. Put dial indicator tip on valve rotator. Be sure that valve is fully closed. RG5789 -UN-09AUG91 3. Check pre-set on dial indicator. Set dial indicator pointer at zero. 4.
Manually turn engine in running direction, using the engine rotation tools previously mentioned for checking valve clearance. 5. Observe dial indicator reading as valve is moved to fully open position. VALVE LIFT SPECIFICATION AT 0.00 MM (IN.) CLEARANCE Intake . . . . . . . . . . . . . . . . . . 13.53—13.71 mm (0.533—0.540 in.) Wear Tolerance . . . . . . . . . . . . . . . . . . . . . 12.65 mm (0.498 in.) 16 6 Exhaust . . . . . . . . . . . . . . . . . 14.52—14.70 mm (0.572—0.579 in.) Wear Tolerance . . . . . . . . . . . . . . . . . . . . . 13.65 mm (0.537 in.) 6. Follow same procedure for all remaining valves and adjust valve clearance to specification.
(See CHECK AND ADJUST VALVE CLEARANCE in Group 05.) RG,CTM42,G16,5 -19-16AUG94 CTM42 (24MAR95) 16-6 6076 Diesel Engines—S.N. (500000— ) 160101 PN=187