John Deere 400 6076 — John Deere 400 6076 User Manual

Camshaft and Timing Gear Train/Install Thrust Washer and Timing Gear Cover INSTALL THRUST WASHER AND TIMING GEAR COVER 1. Lubricate thrust washer (A) with TY6333 or TY6347 High Temperature Grease and install in timing gear cover. RG5782 -UN-06AUG91 RG5783 -UN-13OCT92 2. Install a new gasket on the engine block. Apply a light film of grease to the gasket to hold it in place. NOTE: Tightening the timing gear cover cap screws in proper sequence controls the total runout for the front crankshaft oil seal. 3. Install timing gear cover. Tighten cap screws in sequence one through nine (as shown) to 27 N·m (20 lb-ft). 4. Trim timing gear cover gasket flush with oil pan gasket rail. 5.

Check camshaft endplay. (See CHECK CAMSHAFT END PLAY earlier in this group.) 16 20 RG,CTM42,G16,28-19-29OCT92 CTM42 (24MAR95) 16-20 6076 Diesel Engines—S.N. (500000— ) 160101 PN=201