Lubrication System/Inspect and Clean Oil Pump INSPECT AND CLEAN OIL PUMP 1. Visually inspect oil pump for wear or damage. IMPORTANT: DO NOT disassemble engine oil pump for flushing, inspection, or performing wear checks. Individual components of oil pump are not available through sevice parts, Replace pump as a complete assembly. 2. Flush pump assembly internally with clean solvent to remove oil. Spin pump gears to help remove solvent. 3. Place oil pump on a work bench with pump-to-cylinder block mounting surface facing upward (same as when mounted on engine). NOTE: Leave pump drive gear installed when making checks. IMPORTANT:
To help insure accurate wear measurements, be sure the oil pump is clean and faces the same way as when mounted on the cylinder block. 20 10 RG,CTM42,G20,18-19-15SEP94 CTM42 (24MAR95) 20-10 6076 Diesel Engines—S.N. (500000— ) 160101 PN=213