John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System/Test Mechanical Fuel Supply Pump for Leaks TEST MECHANICAL FUEL SUPPLY PUMP FOR LEAKS Fuel delivery pressure should be checked before removing supply pump from injection pump. (See CHECK MECHANICAL FUEL SUPPLY PUMP OPERATION, in Group 115.) 1. Connect compressed air line (A) to a pressure gauge (B) and to supply pump inlet fitting. Air line should have a regulating valve to control pressure. 2. Cap or plug supply pump outlet fitting (C). RG5894 -UN-19AUG91 3. Submerge supply pump in a container of clean diesel fuel. Regulate air pressure to 200 kPa (2.0 bar) (29 psi). 4. Move roller tappet (Nippondenso pumps) or spindle (Bosch pumps) in and out by hand.

No air bubbles should appear around roller tappet or spindle bore. NOTE: If bubbles appear, it is an indication that either the O-ring seal is defective or spindle or tappet is worn (or possibly both). IMPORTANT: Serious injection pump or engine damage could occur, if enough diesel fuel leaks past spindle and seal. Fuel leakage past spindle dilutes engine oil. RG,CTM42,G35,9 -19-28OCT92 35 11 CTM42 (24MAR95) 35-11 6076 Diesel Engines—S.N. (500000— ) 160101 PN=288