John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System/Install Fuel Injection Nozzles IMPORTANT: Use JDE90 Serrated Wrench (B) on Robert Bosch “P” injection pumps, or a 22 mm open end wrench on Nippondenso “P” and all “A” pumps, to keep delivery valve fittings stationary while tightening fuel line nuts. If a delivery valve and barrel housing rotates while tightening a fuel line nut, injection pump fuel delivery will be altered, and pump will have to be recalibrated on a test stand. RG5877 -UN-19AUG91 RG5878 -UN-19AUG91 18. Remove protective caps and plugs, that were installed during disassembly, from injection lines, nozzles and delivery valves.

Install and connect injection line assembly at each respective injection nozzle and delivery valve. 19. Tighten fuel injection line nozzle nuts (A) to 27 N·m (20 lb-ft). 20. Tighten line nuts at delivery valves to 27 N·m (20 lb-ft) using JDF22 Crowsfoot Wrench (C) or a 3/4 in. Line Wrench (D) along with JDE90 Serrated Wrench (B) (Robert Bosch “P” Pumps) or a 22 mm open end wrench (all other pumps). 21. Bleed the fuel system. (See BLEED THE FUEL A—Fuel Injection Line Nuts SYSTEM, in Group 115.) B—JDE90 Serrated Wrench C—JDF22 Crowsfoot Wrench D—3/4 in. Line Wrench RG,CTM42,G35,46-19-03OCT92 35 62 CTM42 (24MAR95) 35-62 6076 Diesel Engines—S.N. (500000— ) 160101 PN=339