John Deere 400 6076 — John Deere 400 6076 User Manual

Air Intake System Operation and Test/Diagnosing Turbocharger Malfunctions DIAGNOSING TURBOCHARGER MALFUNCTIONS 110 6 Before replacing the turbocharger, determine what caused the failure of the defective unit, and correct the condition. This will prevent an immediate repeat failure of the replacement unit. Refer to Air Intake and Exhaust System Group 30 for repair information. • Oil In Manifold Or Dripping From Housing: Excessive crankcase pressure. Air intake restriction. Drain tube restriction. Damaged or worn journal bearings. Unbalance of rotating assembly: Damage to turbine or compressor wheel or blade. Dirt or carbon build-up on wheel or blade. Bearing wear.

Oil starvation or insufficient lubrication. Shaft seals worn. • Noise Or Vibration*: Bearings not lubricated (insufficient oil pressure). Air leak in engine intake or exhaust manifold. Improper clearance between turbine wheel and turbine housing. Broken blades (or other wheel failures). • Turbine Wheel Drag: • Engine Will Not Deliver Rated Power: Carbon build-up behind turbine wheel caused by coked oil or combustion deposits. Dirt build-up behind compressor wheel caused by air intake leaks. Bearing seizure or dirty, worn bearings caused by excessive temperatures, unbalanced wheel, dirty oil, oil starvation, or insufficient lubrication. Clogged manifold system.

Foreign material lodged in compressor, impeller, or turbine. Excessive dirt build-up in compressor. Leak in engine intake or exhaust manifold. Leak in intake manifold-to-aneroid pipe. Rotating assembly bearing failure. Damaged compressor or turbine blades. • Oil On Compressor Wheel Or In Compressor Housing (Oil Being Pushed or Pulled Through Center Housing): Excessive crankcase pressure. Air intake restriction. Drain tube restriction. *Do not confuse the whine heard during run down with noise which indicates a bearing failure. S11,23005,K -19-18AUG94 CTM42 (24MAR95) 110-6 6076 Diesel Engines—S.N. (500000— ) 160101 PN=379