John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System Operation and Test/Electric Fuel Supply Pump Operation ELECTRIC FUEL SUPPLY PUMP OPERATION 115 23 RG6450 -UN-15OCT92 A—Fuel Inlet B—Fuel Outlet The electric supply pump is used on 6076 Engines equipped with the rotary fuel injection pump. Operation of the pump can be determined by listening for a “clicking” sound when the key is “ON”. A sharp clicking is an indication that there is no fuel getting to the pump. Fuel flowing through the pump muffles the clicking sound. If no clicking sound is heard, check wiring harness for 12 v. If pumps clicks once then quits, there is most likely an electrical problem in the pump and the pump will have to be replaced, as it is not repairable.

As the coil is energized, the plunger is forced down. When the coil de-energizes, a spring forces the plunger back up creating a vacuum. The vacuum draws fuel in through the inlet valve and fills the plunger area. This fuel is then forced out the top of the pump on the subsequent stroke. Maximum pressure delivered by this pump is 69 kPa (0.7 bar) (10 psi) at 2.8 A. RG,CTM42,115,24-19-28OCT92 CTM42 (24MAR95) 115-23 6076 Diesel Engines—S.N. (500000— ) 160101 PN=406