John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System Operation and Test/Rotary Fuel Injection Pump Operation—Stanadyne DB4 ROTARY FUEL INJECTION PUMP OPERATION—STANADYNE DB4 115 38 RG4910 -UN-14DEC88 1—Drive Shaft 6—Pressure Regulator 11—Governor 16—Rollers 2—Distributor Rotor 7—Discharge Fitting 12—Governor Weights 17—Supply Pump Inlet 3—Hydraulic Head 8—Metering Valve 13—Advance 18—Charging Ports 4—Delivery Valve 9—Pumping Plungers 14—Drive Shaft Bushing 19—Throttle Lever 5—Supply Pump 10—Internal Cam Ring 15—Housing The main rotating components are the drive shaft (1), distributor rotor (2), supply pump (5), and the governor (11). The supply pump at rear of rotor is a positive displacement vane-type pump enclosed in the end cap.

The end cap also houses supply pump inlet (17), fuel strainer and pressure regulator (6). Supply pump pressure is automatically compensated for viscosity effects due to temperature changes and fuel grade variations. The drive shaft engages the distributor rotor in hydraulic head (3). The drive end of rotor incorporates two pumping plungers (9). The plungers are actuated toward each other simultaneously by an internal cam ring (10) through rollers (16) and shoes which are carried in slots at drive end of the rotor. The number of cam lobes normally equal the number of engine cylinders.

The distributor rotor incorporates two charging ports (18) and a single axial bore (passage) with one discharge port to serve all head outlets (7) to the injection lines. The rotor rotates in bore of hydraulic head. Metering valve (8) bore, charging ports and discharge fittings are located in the head. CTM42 (24MAR95) 115-38 6076 Diesel Engines—S.N. (500000— ) RG,CTM42,115,29-19-28OCT92 160101 PN=421