Komatsu — 15.1 BEFORE STORAGE

15. LONG-TERM STORAGE (MORE THAN ONE MONTH) 15.1 BEFORE STORAGE When putting the machine in storage for more than one month, do as follows. After every part is washed and dried, the machine shall be housed in a dry building. Never leave it outdoors. In case it is indispensable to leave it outdoors, park the machine on the well-drained concrete and cover it with canvas etc. Completely fill the fuel tank, lubricate and change the oil before storage. Apply a thin coat of grease to metal surface of the hy- draulic piston rods and the idler adjusting rods. Disconnect the negative terminals of the battery and cover it, or remove it from the machine and store it separately.

If the ambient temperature is expected to drop below O”C, always add antifreeze to the cooling water. Lock each work equipment control lever with the safety lock, and place the fuel control lever in the ENGINE STOP position. Lock the brake pedal with brake lock lever and remove the key of starting switch, use blocks to stop the machine from moving. 2-79