16. TROUBLESHOOTING 16.2.1 STARTING ENGINE WITH BOOSTER CABLE When starting the engine with a booster cable, do as follows: Precautions when connecting and disconnecting cable booster A WARNING When connecting the cables, never contact the posi- tive 0 and negative 0 terminals. When starting the engine with a booster cable, always wear safety glasses. Be careful not to let the normal machine and problem machine contact each other. Make sure that there is no mistake in the booster cable connections. The final connection is to the en- gine block of the problem machine, but sparks will be generated when this is done, so connect to a place as far as possible from the battery.
INCORRECT 9 I NOTICE l The size of the booster cable and clip should be suitable for the battery size. l The battery of the normal machine must be the same ca- pacity as that of the engine to be started. l Check the cables and clips for damage or corrosion. l Make sure that the cables and clips are firmly connected. 2-82