24. SERVICE PROCEDURE 24.2 WHEN REQUIRED 24.2.1 CLEAN INSIDE OF COOLING SYSTEM -A WARNING Soon after the engine has been stopped, the coolant is hot and can cause personal injury. Allow the engine to cool before draining water. Never be under the machine with the engine running. To avoid serious injury, always stop the engine before being under the machine. Never remove the radiator cap when the engine is at operating temperature. At operating temperature, the coolant is under pressure. Steam blowing up from the radiator could cause personal injury. Allow the engine to cool until the radiator filler cap is cool enough to touch with your hand. Remove the filler cap slowly to relieve pressure.
When removing drain plug, avoid pouring coolant on yourself. Antifreeze is flammable, so keep it away from any flame. l Stop the machine on level ground when cleaning or changing the coolant. l Clean the inside of the cooling system, change the coolant and replace the corrosion resistor according to the table below. Kind of coolant Cleaning inside of cooling system and changing coolant Replacing corrosion resistor Permanent type antifreeze Every year (autumn) or (All season type) every 2000 hours whichever comes first Every 6 months or every When not using antifreeze 1000 hours whichever comes first 3-23