24. SERVICE PROCEDURE CLEAN AIR CONDITIONER AIR FILTER If the air conditioner air filter is clogged or there is dirt or dust in it, clean the filter. 1. Open the inspection cover and remove FRESH filter 0 from the holder. 2. Remove the bolt at the left side of the operator’s seat, then remove RECIRC filter 0. 3. Clean filters 0 and 0 with compressed air. If there is oil stuck to the filter, or it is extremely dirty, wash it in a neu- tral agent. After washing it, dry it completely before install- ing it again. REMARK If the clogging of the filter cannot be removed by washing or using compressed air, replace the filter with a new part.
24.2.12 CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID If there is air in the window washer fluid, check the level and add fluid. Open the engine side cover on the right side, check the level of the fluid in window washer tank 0, and if it is low, add automobile window washer fluid. When adding fluid, be careful not to let dirt or dust get in. 3-39