24.4.7 CHECK BRAKE PERFORMANCE A WARNING If the machine moves when the following check is car- ried out, ask your Komatsu distributor to carry out re- pair. Before starting the engine, confirm the safety around the machine and carry out the following check. 1. Start the engine. 2. Set safety locks 0 to the FREE position, then operate blade control lever and ripper control lever 0 to raise the blade and ripper. Keep the safety locks at the FREE position. 3, Place the brake lock lever in “FREE”. 4. Depress brake pedal 0 and place gear shift lever 0 in the 2nd speed position. NOTICE Do not place the gear shift lever in the 1st speed posi- tion. Otherwise, it will cause damage to the machine. 5.
Operate fuel control lever 8 and inclease the engine speed little by little up to full speed. 6. If the machine does not move when the above operation is carried out, the brakes are normal. 3-53