Komatsu — 12.4 MOVING MACHINE

12. OPERATION 12.4 MOVING MACHINE A WARNING When moving machine, check that the area around the machine is safe, and sound the horn before moving. Clear all personnel from the machine and the area. Clear all obstacles from the path of the machine. Use extreme care when reversing the machine. Note there is an blind spot behind the machine. When starting on slopes, always keep brake pedal 0 depressed even after releasing brake lock lever 0. When starting on steep slopes, set fuel control lever @ to the full speed position, depress brake pedal 0 and deceleration pedal 8.

Then set gear shift lever 0 in lst, and slowly release the deceleration pedal and brake pedal at the same time to allow the machine to start. Unlock the blade control lever and the ripper control lever with safety locks 0. Put blade control lever 0 and ripper control lever 0 in the RAISE positions to raise the blade and the ripper 40 to 50 cm (1.3 to 1.6 ft) off the ground. 3. Depress brake pedal 0, place brake lock lever @ in FREE, and return the brake pedal to home position. 2-49