Komatsu — 12.11 EFFECTIVE METHOD OF OPERATION FOR DUAL TILT DOZER

12. OPERATION 12.11.2 LEVLING (SPREADING) OPERATIONS Carry out this operation with R pitch. If the tilt cylinder is moved completely to the end of its stroke, the tilt operation cannot be carried out on one side, so move the cylinder back slightly from the end of its stroke to the S pitch position. REMARK When carry out this operation with R pitch, the end bit does not dig in, and the ground can be leveled (or the soil can be spread) smoothly. 1 ?.I 1.3 DITCHING OPERATIONS If the dual tilt is used, the digging width becomes smaller and a deeper ditch can be dug. If R pitch is used, the digging can be carried out gradually, and this reduces the unevenness.

12.11.4 SIDE-CUTTING OPERATIONS Carry out this operation in R pitch, and set the end face of the end bit in contact with the rock face to carry out cutting. 12.11.5 HORIZONTAL DOZING OPERATIONS FROM SIDE SLOPE (ROUGH GROUND) The dual tilt can give a larger amount of tilt, so when doz- ing from a side slope, this is effective because the chassis becomes horizontal after a short digging distance. 2-61