SPECIFICATIONS STEERING SYSTEM Center-pivot frame articulation. Orbital type, full- hydraulic steering independent of the engine RPM’s. A wide articulation angle of 40” on each side for a minimum turning radius of 13’7” or 5065 mm at the outside corner of the bucket. HYDRAULIC SYSTEM A gear pump for steering and loader control. Hydraulic cylinders Capacity (discharge flow) at engine 2500 RPM Loader _ . 35.0 US. gal/min 133 Itr. Hydraulic Number cylinders Bore Stroke Relief valve setting Loader 2990 psi Steering 2700 psi 210 kg/cm2 190 kg/cm2 Control valves A 2-spool type control valve. Hydraulic cycle time (rated load in bucket) Raise 5.2 sec. Dump 1.1 sec. Lower (empty) 3.0 sec.
SERVICE REFILL CAPACITIES Cooling system Fuel tank Engine Brake oil tank 4.2 U.S. gal. 16 Itr. Hydraulic system 10.0 U.S. gal. 38 Itr. 31.7 U.S. gal. 120 Itr. Differential and final drive case 2.8 U.S. gal. 10.5 Itr. (each side) 3.7 U.S. gal. 14 Itr. 0.3 U.S. gal. 1 Itr. Torque converter and transmission 4.9 U.S. gal. 18.5 Itr. 4-3