Komatsu — TIGHTENING TORQUE OF SPLIT FLANGE BOLTS

SPECIFICATIONS STANDARD TIGHTENING TORQUES STANDARD TIGHTENING TORQUE OF BOLTS AND NUTS The following charts give the standard tightening torques of bolts and nuts. Exceptions are given in sections of this manual. 0 0 T km 0 0 H Thread diameter Width of bolt across flat (mm) (mm) Nom 6 10 1.35kO.15 8 13 3.220.3 10 17 6.720.7 12 19 11.521.0 14 22 18.022.0 13.2k1.4 31.422.9 65.7k6.8 112k9.8 177219 16 24 28.523 18 27 39+4 20 30 5626 22 32 7628 24 36 94.5+10 279229 383+39 549258 745 + 78 927 + 98 27 41 135515 30 46 175220 33 50 225 f 25 36 55 280*30 39 60 335235 13202140 17202190 2210?240 2750 rf:

290 3280 f 340 This torque table does not apply to the bolts with which nylon packings or other non-ferrous metal washers are to be used, or which require tightening to otherwise specified torque. * Nom (newton meter): 1 Nom ti 0.1 kgm TIGHTENING TORQUE OF SPLIT FLANGE BOLTS Use these torques for split flange bolts. Thread diameter Width of bolt across flats (mm) (mm) Tightening torque kgm N-m 10 14 6.7kO.7 65.7t6.8 12 17 11.5rl 112k9.8 16 22 28.523 279 2 29 4-7