OPERATION KAB SEAT WEIGHT ADJUSTMENT For maximum comfort and protection from vibration it is important that the suspension is set correctly for your weight. Turn the adjuster knob (1) until the indicated weight (seen inside the transparent knob) corresponds to your weight in kilograms. The optimum adjustment is for the suspension to be in the middle of the vertical stroke (“mid-ride” position) when normally seated. HEIGHT ADJUSTMENT After adjusting for weight, the seat height and cushion angle may be adjusted by lifting levers (2 and 3). The front and rear of the seat are adjusted independently. BACKREST ANGLE ADJUSTMENT Lift lever (4), set backrest to desired angle and release lever.
FORE AND AFT ADJUSTMENT X13BHOM Lift control (5), slide seat to the desired position. Ensure mechanism is fully engaged after adjustment. HEADREST ADJUSTMENT (IF EQUIPPED) The headrest (6) height is adjusted by sliding up or down, and the angle by pivoting backwards or forwards. RIGHT SIDE ARMREST HEIGHT ADJUSTMENT Loosen mount bolts (1) to move the armrest to the desired position and tighten the bolts. ANGLE ADJUSTMENT Loosen mount bolts (2) to move the armrest to the desired angle and tighten the bolts. / L13BHOiE 2-21