OPERATION 9. EXPLANATION OF COMPONENTS 9.1.4 OPERATION METHOD FOR SSC MODE SELECTION USING RADIO CONTROL CAUTION Check that the radio control can be operated (yellow rotating lamp is flashing). Selecting dozing mode 1. Each time the center control lever is pulled back fully, the mode is switched as follows. Lock-up mode ON lock-up mode OFF (normal) economy mode 1 economy mode 2 2. Each time the center control lever is pushed forward fully, the mode is switched as follows. Economy mode 2 economy mode 1 lock-up mode OFF (normal) lock-up mode ON 3. In the condition in Step 1 or Step 2, each time the horn button is pressed, the horn will sound and the reverse slow mode will be switched ON/OFF.
REMARK hen carrying out the operation in Step 2, if the mode is switched lock-up mode OFF (normal) lock-up mode ON, the reverse slow mode is automatically turned OFF. When each mode is switched, the horn sounds for 1 second and all the rotating lamps light up. For details of each mode, see the Operation and Maintenance Manual for the standard machine. Selecting ripping mode 1. Each time the center control lever is operated fully to the left, the mode is switched as follows. Mode 5 mode 4 mode 3 mode 2 mode 1 mode OFF 2. Each time the center control lever is operated fully to the right, the mode is switched as follows. Mode OFF mode 1 mode 2 mode 3 mode 4 mode 5 3.
In the condition in Step 1 or Step 2, each time the button at the top of the center control lever is pressed, the reverse slow mode will be switched ON/OFF. REMARK When carrying out the operation in Step 2, if the mode is switched mode OFF mode 1, the lock-up mode is automatically turned OFF. When each mode is switched, the horn sounds for 1 second and all the rotating lamps light up. For details of each mode, see the Operation and Maintenance Manual for the standard machine. 3-9