10. HANDLING RADIO CONTROL OPERATION 10.2 FLOW CHART FOR STOPPING OPERATION USING RADIO CONTROL Transmitter has been tilted continuously for more than 2 seconds. After approx. 3 seconds after turning power key switch on transmitter OFF. Press emergency stop button on transmitter. Start engine. Set parking lever to LOCK position (lowered) Return key on machine to OFF position Set selector switch to ON-BOARD If the engine does not stop (this may happen if an error has occurred and the red rotating lamp is lighted up), stop the machine at a safe place, use the radio control operation to apply the parking brake, and check that the condition is safe.
Then get on the machine, set the parking lever to the LOCK position, turn the key to the OFF position, and stop the engine. 3-18