Komatsu — 12.4 Acceleration/deceleration

OPERATION 12. Operation using radio control 12.2 STEERING (CHANGING DIRECTION OF TRAVEL) WARNING Avoid making sudden changes in the direction of travel. In particular, it is dangerous when traveling at high speed, as it is difficult to control the machine. CAUTION When carrying out steering facing the machine, the direction of steering is the opposite, so check the direction carefully. 1. When steering the machine, operate left control lever (1) in the direction that it is desired to turn. 12.3 WORK EQUIPMENT (BLADE RAISE/LOWER/FLOAT, TILT LEFT/RIGHT, RIPPER UP/DOWN, RIPPER TILT IN/BACK) WARNING When operating the work equipment, avoid starting or stopping suddenly.

Operating the work equipment suddenly makes the machine unstable and is extremely dangerous. 1. Operate right control lever (1) to carry out operations. 12.4 ACCELERATION/DECELERATION 1. Operate with right control lever (2). Only when right control lever (2) is being operated, it is possible to change the engine speed temporarily from the speed set by the engine speed control switch. 3-27 Direction of lever operation Amount Engine speed control switch Acceleration (pull) Deceleration (push) Small Large Small Large Low High Medium No change (high) High No change (high) No change (low) Medium No change (low) Low