. OPERATION EXPLANATION OF COMPONENTS 3 - 48 STOWING BOD Y PIVOT PIN pivot pin under the rear of the dump body. ot pin (1), then insert lock pin (2) to stow the body ngine. ontrol lever (3) to the FLOAT position. ody pivot pin (1) from the dump body and frame. Store the body pivot pin under the rear of t Insert body piv pivot pin. 1. Start the e 2. Set dump c 3. Remove b 4. Set the du the dump b 5. When the pin (1) into 6. To prevent (2) into bod 2. Set dump c 3. Remove b ontrol lever (3) to the FLOA ody pivot pin (1) from the du 4. Set the du mp control lever to the LOWER position and lower ody. dump body is completely seated, insert body pivot the body. lower 6.
To prevent the body pivot pin from com ing out, insert lock pin y pivot pin (1). LOCATION OF FIRE EXTINGUISHE (if equipped) Fire extinguish er (1) is installed to the left f ront of the machine. DUST INDIC ATOR he amount that the air cleaner is clogged. This displays t he amount that the air clean Yellow display (1) appears in the transpare nt portion according to the amount tha t the air cleaner element is clogged. When y ellow display (1) rea ches the 7.5 kPa {0.076 kg/ ment. For details of the pro cm2} position, clean or replace the ele cedure for cleaning or replacing, see "CHECK, CLEAN OR REP LACE AIR CLEANER (PAGE 4-24)".
After cleaning or replacing, press top portion (2) of the dust indica tor to reset yellow display (1 ) to its original position. REMARK Yellow display (1) in the transparent portio n of the dust indicator i s lock ed in steps by the r esistance of the intake air when the e ngine is running, so even wh en the engine is stopped, it i s possible to know t he amount that the ai cleaner is clog ged. When the top portion ( 2) of the dust indicator is pressed, the lock is rele ased.