. OPERATION OPERATION WARNING ADJUSTING OPERATOR'S SEAT ANGLE the rear of the seat release lever 3 - 82 When standing up from th e operator's se at, place the g ear shift lev er in N position and set th e parking bra ke switch to PARKING position. Place t he dump control l ever at HOLD and loc k with the lo ck knob, t hen stop the eng ine. If you tou ch the gear shift lever or dump control lever, th e machin e may s uddenly mov e and caus e serious personal FORE-AND-AFT ADJUSTMENT OF OPERATOR'S SEAT 1. 2. 1. Pull rear 2. Set the se at to the desire d positi on, then rele ase lever Fore-and- aft adjustment: 180 mm (10 mm x 18 stages) ront or BACKWARD 1. 2. 1. Pull up lev er (2) an cushion.
T he seat cushio n will tilt to the rear. 2. Set (2). FORWAR D 1. 2. 1. Pus h dow n lever (2 ) and a pply yo ur weight to the front o f the sea t cushion. The seat cushio n will tilt to t he f ront. 2. Set the se at cushi on to th e desir ed angle, th en release lever (2 Amount of adjustment: 13 degre