. OPERATION OPERATION STARTING ENGINE NORMAL STARTING WARNING 1. Turn the key of starting switch (1) to the START position. The engine will start. 3 - 91 When starting the engine, sit in th e operator's seat, sound the horn to warn people in the surround ing area that the machine is about to move, then start the e ngine. If the machine is started off without giving a warning, there is danger that the people in the area around the machine m ay suffer serious personal injury. Do not short circuit the starting motor circuit to start the engine. If the starting motor circuit is s hort circuited, sparks are generated and this may cause fire or other damage.
The engine exhaust gas is dange rous to the health and includes components that may cause de ath. When the machine is inside a building, open the windo ws and doors, and remove any objects that may obstruct the flo w of air. After starting the engine, move the machine outsid e the building immediately and carry out the warming-up operation. Do not carry out the building. out tion. Do not carry out the warming-up operation inside the NOTICE Avoid suddenly accelerating t operation is completed.
If the components is at low tempera he engine before the warming-up oil in the engine and hydraulic ture, and the engine is suddenly accelerated, the lubricating oil components will be lost, and this Do not keep the starting motor ru seconds. If the starting motor is film in the engine and hydraulic will cause wear and other problems. nning continuously for more than 20 run for more than 20 seconds, the voltage in the battery will drop, th e starting motor speed will go down, and it will be unable to start the en gine. Wait for at least two minutes to allow the battery voltage to reco again. ver before trying to start the engine 2.
When the engine starts, rele ase the key in starting switch (1). The key will return automatic ally to the ON position.