. OPERATION TRANSPORTATION METHOD OF LIFTING MACHINE WARNING Never try to lift the machine in any posture other than the posture given in the procedure below or equipment other than in the procedure below. There is a hazard that the machine may lose its balance. please consult your Komatsu 3 - 132 When lifting the machine at a port or any other place, alway s use the following procedure t o lift it. When carrying out lifting opera tions, if mistakes are made in the o peration, t here i s danger that the m achine wil l fall and cause serious personal injury.
Always Always make sure that the w ire rope is of ample strength for the weight of this In order to prevent the wire rope from being cut, use protective material at places w here the wire rope may catch on sharp corners. When raising the machine, k Do not go under a raised ma chine or let any other person enter the area a round the machine. Do not lift the machine when there is anyone on the machine. Stop the engine, then set th e parking brake switch to the PARKI NG positi on to a pply the parking b rake. using lifting This method of lifting applie s to the standerd specification m achine. s installed.
The method of lifting differs according to the attachments a nd option s installe For details of the procedur distributor. e for machines that are not tha standard specification For the weight of the standa rd specification machine, see " SPECIFICATIONS (PAGE 5-2) When using a spreader bar, use a size that will not come in to contac t with the machine. Consult your Komatsu distri butor before performing lifting w ork.