. MAINTENANCE SERVICE PROCEDURE REPLACE ELEMENT WARNING 1. Stop the engine. 2. Remove 6 hooks (5) of dust cup (4), then remove the dust cup. it up and 4 - 28 When pulling out the air cleane r element, make sure that y ou are standing on a firm plac e. If your footin g is not secure w hen you perform the operation, there is danger of falling and suffering i njury 3. ove down and to the left an d right while pulling it out 4. Hold inner element (7) so that it does not come out, and c lean the inside of the air cle aner body with a dry clot h. 5. Use a dry cloth or com pressed air to clean off th e dir t stuck to dust cup (4) and vacua tor valve (8). 6.
Check that there are no cracks in the lip of the v acuator valve (8). If any cracks are f ound, replace with a new part . 7. Pull out inner element ( 7) and install a new inne r elemen 8. Install outer element (6 ) in the air cleaner body.