. ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER II (CARD TYPE) HANDLING PAYLOAD METER II (CARD TYPE) The payload meter always carries out self-diagnosis of the system, and if any problem or warning occurs, it displays the content.
with a built-in KOMTRAX Plus type payload meter, the 6 - 36 The payload meter input s the signals from the pressur e sensors, clinometer (*1), body float det ection, and neutral detection, and uses the built-in microcomputer to ca lculate the amount lo load on the panel displa y and also displays the load on the external displa (*1) This is not installed It is also possible to use the switches on the payload meter itself t o display t he aggregate paylo ad or total number of cycles from a certain time, and to forcibly display p roblem an d warning i tems that are now occurring, or h ave already occurred and b een restored to normal.
The payload meter auto matically records dump truc k operation date, such as the payload, ti me, distance, and travel speed for each cy cle, together with the time an d date of s tarting or s topping the engine , time and dat e of the occurrence and rem edy for problem or warnings, and the aggregate pa yload and total num ber of cycles f rom any given time. These automatically rec orded data are retained when the power is turned o ff, so it is possible t o send (download) the data to a personal computer from the payload meter through a cab le connected to th e port (ANSI/EIA RS232C) inside the cab .
In addition, it is also possibl e to display the dump truck operation dat a (based on th ese data) on the personal c omputer screen, to print it ou t, or to convert it to d et (Lotus 1-2- 3 or EXCEL). Furthermore, if a memor y card is inserted in the paylo ad meter, th ese date c an be written to the memory card and then read to a personal computer from the memory c ard, so the date can b e processed in the same way as with cable communications using a personal computer. REMARK The personal computer sof tware supplied by Komatsu is necessary for downlo ading the date, rea ding the date f rom a memory card to a perso nal computer, and processing the date.
Please con sult your Komatsu distributor. It is possible to set the machine ID, open ID, and tra vel speed li mit for eac h payload meter (f or each machine). If a card-type payload me ter is installed to a machine KOMTRAX Plus type payl oad meter will not work.