. ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER II (CARD TYPE) FORCED DISPLAY OF TOTAL PAYLOAD AND OVERALL NUMBER OF CYCLES added. for that is Method for forced display operation The forced display of the total payload and overall number of cycles, clear, and forced display of the warning codes during occurrence can only be carried out if the dump lever is at the FLOAT position during the normal operation display. If any new problem or warning should occur during the display, the system will return automatically to the display during normal operation when this happens. 1. Press TOTAL/SFT switch (1).
the REMARK Before clearing the data, download the necessary data for the total payload and overall number of cycles to a personal computer or save the data to the memory card. 6 - 56 FORCED DISPLAY OF PROBLEMS, WARNINGS WHEN THEY HAVE OCCU RRED The payload meter displays the total payload when the load is dumped, but it is also possible to use the fo operation to display the total p ayload and overall number of cycles. For the total payload and ov erall number of cycles, each time the load is dumped, its weight is time.
s occurred, the error code Furthermore, it is possible to cl ear this figure and return the total to 0 at any However, when this operation problem or warning is display displayed.) 2. If no problems or warnings ar e occurring at present d (100 t units, rounded to the nearest 100 t) (lights up). (1) again. cles is displayed. (Unit: times) (lights up) (1) again. The total payload is displaye 1) Press TOTAL/SFT switch The overall number of cy 2) Press TOTAL/SFT switch ":" is displayed (lights up) d (100 t units, rounded to the nearest 100 t) (l for 2 seconds, then the display returns to the display for nor mal operatio 3. If problems or warnings are o ccurring at present (Flashes) (1) again.
The error code is displayed. 1) Press TOTAL/SFT switch If any other problem or w 2) Press TOTAL/SFT switch If no other problem or w display returns to the nor arning is occurring at present, the next error c ode is displaye d. (Flashes) (1) again. arning is occurring at present, ":" is displayed (flashes) for 2 seconds, th mal operation display. It is possible to clear all the data f or total payload and overall number of cycles whenever des After the values are cleared, the t otal payload and overall number of cycles ar e calculated ag